Seismic (Machine Case Mount) Vibration Transmitter

Features:

Electrical
Overall vibration output: 4-20mA, load (loop powered)
Accuracy: 3%
Frequency response (+/- 3db): Acceleration: AAA= 200, 201, 202: 2 – 3,000 Hz Velocity: AAA= 000 to 162: 2 – 3,000 Hz
Transverse sensitivity: < 5%
Power supply: 12VDC – 30VDC < 30mA
Maximum load resistance: 600 ohms @ 24VDC power supply
Isolation: 500Vrms, circuit to case
Case material: Stainless steel

Output connection:
Flying leads: 2 cables for 4-20mA / 2 cables for buffered output
Mil connector: 2 pins for 4-20mA
Buffered output: 100mV/g nominal
Maximum cable length 3m (10ft)
Filter option: 40dB/oct for hi-pass filter 40dB/oct for low-pass filter
Intrinsically safe: ATEX: II 1G EEx iaIICT4 @Ta=-40oC to+100oC
(Ui=30V, Ii=110mA, Pi=825mW, Ci=51.7nF, Li=84uH)
PCEC: Ex iaIICT4

Physical
Temperature: Operation:
Normal (G=0): -40oC to + 100oC (-40oF to +212oF)
High (G=1): -40oC to + 120oC (-40oF to +248oF)
Storage: -50oC to + 125oC (-58oF to +257oF)
Dimensions:
Diameter: 38mm (1.5”)
Height: Flying leads: 78mm (3.1”);
Mil connectors: 87mm (3.4”)
Weight: 240g (0.5lb)
Output Connections: 2-pin MIL-C-5015 Flying leads: 2 or 4 wires 1 NPT
Environmental: Flying leads: NEMA 4X, IP65 2-pin connector: IP67